How to create printed clear acrylic keyrings using Paint Tool SAI

This tutorial contains everything you need to know about creating your own printed clear acrylic keyrings using the design software Paint Tool SAI.

Important - Colour Management

Please note that Paint Tool SAI can only create documents in RGB colour whereas we only print in CMYK colour.



A quick search on the internet for 'the difference between RGB and CMYK' will provide you with a wealth of information on this subject, but we wanted to make you aware that the colours of your designs on screen will be different to the colours of your final printed products.

The image below shows the RGB palette on the left and the same palette converted to CMYK on the right. RGB colours appear vivid with bright blues and greens. CMYK in comparison appear flatter with slightly duller colours.



We convert all Paint Tool SAI images from RGB to CMYK before printing so do remember to bear these colour differences in mind. Always remember to order samples if you require any colour accuracy or if you are unsure or feel that you may be unhappy with these colour changes.

1. Download our templates

To start submitting your custom printed acrylic keyring designs you'll need to download our design templates. Templates are available in various sizes ranging from 0.5" (12.7mm) right up to 3.5" (88.9mm).

Download our Paint Tool SAI templates >> here << and open your chosen size.

Each template comes with a working area where you will import or create your designs. Please make sure that your artwork fits INSIDE of the blue borders.

2. Understanding our layers

Opening the template, you will notice that there are 7 layers in your Layers palette.



IMPORTANT - Please don't rename existing layers or create additional layers as this will confuse our systems when processing your designs.

'OFFICE USE ONLY' Layer
This layer contains the blue borders which your design must sit inside, our logo and a brief description of the template size that you are using. DO NOT USE THIS LAYER.

'Artwork A' Layer
We print your designs in reverse onto the 'back' of our clear acrylic, before adding a layer of white ink. When you turn your printed charm over and view it through the front of the acrylic, your design appears the correct way around.

ALL ARTWORK ON THIS LAYER SHOULD BE FLIPPED SO THAT IT IS A MIRROR IMAGE OF ITSELF. 

'Artwork B' Layer
We print the 'Artwork B' layer directly on top of the 'Artwork A' layer to create a double sided charm.

DO NOT FLIP/MIRROR THE ARTWORK ON THIS LAYER.

'White' Layer
Adding a base layer of white to your charms will make your colours crisper and more vivid. Any printed areas without a white base layer will appear transparent.

'Gloss Varnish' Layer
If you would like your charms to have a gloss finish as opposed to a matte finish, you can use this layer to show us where you would like the your areas of gloss to be placed. 

‘Cut Area’ Layer

Use this layer to show us where you would like your charms to be cut. We'll use this information to create a path which will then be used to create a cut line for our laser cutters. 

Please note that we do not print right up to the edge on any of our acrylic charms. It is therefore ESSENTIAL that you create a border of AT LEAST 1mm between your artwork and your cutline. 

Failure to leave a 1mm border on your acrylic charm designs can result in damage and lifting along the printed edge of your charms as a result of the heat generated by the laser. See step 5a for more info.

‘Loop’ Layer
Drag and drop our loop template from this layer onto your artwork to show us where you would like your loop to be placed. You can use the blue borders of the template when positioning your loop.

The dark red circle represents the hole that will be cut into your keyring design, the light red circle represents the area of your design that will be hidden by the keyring finding and the dotted line represents the external cut line of the loop.

3. Importing your designs

Select the 'Artwork A' or 'Artwork B' layer in your layers palette and either draw your design directly on these layers or, simply copy (CTRL+C) and paste (CTRL+V) previously saved artwork.

'Artwork A'
Create or paste the artwork that you would like to appear on the 'front' of your keyring here. Once you are happy with your design FLIP IT so that it is a mirror image of itself.



We will print your design onto the 'back' of the clear acrylic before adding a layer of white. Your design will then be visible, the correct way around, via the 'front' of the acrylic.

'Artwork B'
This is where you will create or paste the artwork that you would like to appear on the 'back' of your keyring for our 'B-Side' printing option. DO NOT FLIP THIS LAYER!



We print your B-Side ('back') design directly on top of the A-Side ('front') design to create an awesome looking double sided keyring.

4. Check your Alignment

If you're producing double sided keyrings it's important that your A-Side and B-Side artwork lines up correctly.

A simple way of checking this is to select your 'Artwork B' layer and lower the opacity to 50%



Now view your artwork and check that both sides A & B are the same size and nicely aligned. Here's an example of how it should look...

5a. Adding a layer of white

To guarantee bright and crisp colours for your artwork you'll need to add a white base layer to your designs. This white layer will sit behind your artwork and will ensure that the colours of your designs are consistent, regardless of what material you choose.

Check out the charms below by jwhitneyart.com. Using a white base layer of ink means their designs look the same on our white and black acrylics.



Please note that we ask that you create this white layer for ALL of your charm designs, even white acrylic charms.

An additional benefit of creating your own white base layer is that you can let us know EXACTLY where you would like us to print your white areas. This allows customers to add additional features to their designs, such as transparencies on our clear acrylics, as well as reducing any areas of white creeping around the edges of your artwork. 

To create your white base layer simply hold down the 'CTRL' key and click on the thumbnail of your 'Artwork' layer. This will select all of the elements of your artwork layer.



You will now need to inset (shrink) your selection by 1 pixel to prevent any areas of white from showing around the edge of your charms once they've been printed. To do this invert your selection SELECTION > INVERT, your selection should look like the image below...



With your selection inverted, use the increment option SELECTION > INCREMENT to inset your selection before inverting the selection again SELECTION > INVERT

Click on the RGB slider in your colour & tool panel and create a Cyan colour (R:000 G:255 B:255) 

Select the 'Bucket' tool and click inside your selection to fill the selection Cyan. 

Click 'OK' and 'OK' again. You should now have a Cyan silhouette of your original artwork, placed on your 'White' layer.



Be aware that contracting your selection in this manner can have an effect on the pixels selected. Always zoom in on areas with fine details such as strands of hair or small point text and check that you are happy with the results.

Please remember that we always recommend ordering samples before committing to large print runs, so that you can check that you are happy with the result. mistakes can not be rectified once your charms have been printed.

5b. Transparencies

The 'White' layer can also be used to create areas where you don't want a white base. This effect works especially well on our clear acrylics to create transparencies (areas with coloured ink and no white ink or areas with no ink at all).



To create a transparent area, simply delete any unwanted areas on your white layer using the eraser or any of the other tools at your disposal in SAI to achieve your desired effect. You can see this effect on our clear acrylic charms above.

6a. Working with gloss varnish

You can choose to have a gloss or matte finish on your designs by selecting the matte or gloss option when placing your orders. If you choose 'Gloss' as your option, you will need to create a grey silhouette on the 'Gloss Varnish' layer, similar to how you created the cyan silhouette on your 'White' layer in step 5 of this tutorial.



Click on the RGB slider in the 'Color and Tool' panel and create a grey with the following colour values R:150 G:150 B:150.

CTRL click on your artwork layer to select all of the elements of that layer. Select your 'Gloss Varnish' layer and using the Bucket tool, click inside of your selection.

You should now have a grey silhouette of your original artwork, placed on the 'Gloss Varnish' layer.

6b. Spot gloss varnish

As well as being able to add gloss varnish to your entire design, you also have the option to limit this to certain areas, in effect highlighting particular elements of your design. Handy for creating textures like water droplets or snakeskin.



To do this, simply delete any unwanted parts of the grey silhouette that you created in step 6a. or create a custom silhouette based on the areas of your design that you would like to highlight.

7a. Adding a border / cut line - Important!

You can now decide on the thickness of your border, which will be used as a cut line. It is ESSENTIAL that you make this border AT LEAST 1mm wider than your artwork. Failure to do so can cause your printed design to lift along the cut edge as a result of the heat generated by the laser. A 1mm border will prevent this from happening. 

To create your cut line, CTRL click on your Artwork Layer to select all of the elements of that layer. Select your 'Cut Area' layer and use the Increment function approximately 20 times to increase your selection by the required amount. 

A slightly quicker way to do this is by using the shortcut ALT+S followed immediately by the 1 key. Do this 20 times.



Using the Bucket fill the selection black. This colour will not be printed, it's simply for our designers to use as a guide when creating your cut line.



TIP - Use the Eraser tool to round off any square edges of your cut line silhouette and the Brush tool to cover any areas missed by the 'fill' command.

7b. Adding a loop

Let us know where you would like # us to attach your keyring finding by dragging and dropping the loop template into position on your design. 

You can use the blue borders of the template when positioning your loop.



The dark red circle represents the hole that will be cut into your keyring design, the light red circle represents the area of your design that will be hidden by the keyring finding and the dotted line represents the external cut line of the loop.

Please don't merge the loop template with your design as we’ll need to remove this before printing so that it's not visible on your finished design.

8. Visual Guide

Here's a quick exploded view of our clear acrylic charms, showing how each layer sits together to make your custom charm designs. You can view the full visual set up guide here.

9. Submission checklist

Congratulations, you've finished creating your custom keyring design! All you have to do now is check the following before submission...

  • Your artwork fits inside of the blue borders.
  • Your white base layer is Cyan and located on the 'White' Layer (Step 4a.)
  • Your gloss varnish layer is Grey and located on the 'Gloss Varnish' layer (Step 5a.)
  • The loop layer has NOT been grouped or merged with the rest of your design.
  • Your border is AT LEAST 1mm thick.
  • Your template contains 1 design only. Additional designs will be sent separately.

10. Saving and submitting your designs

There are 3 different ways to save and submit your designs...

1. Submit your artwork immediately

If you have already created your designs, you can send them to us using the 'Upload Artwork' button, located on our product pages or by emailing them to ‘info@zapcreatives.com’.

Save all Paint Tool SAI files in .Psd format. Here’s how…

Name each of your designs appropriately so that we know which designs you are referring to. Your file names should include 1. your name, 2. design number, 3. chosen product and the 4. date that you placed your order through our website. Here’s an example…

Select all of the designs that you would like to submit, right click and choose SEND TO > COMPRESSED (ZIPPED) FOLDER.



This will create a compressed folder containing all of your designs. Rename this folder so that it contains your name and the date that you placed your order on our website. Like this…

Please add all of your designs into one folder. So, if you purchased charms, stickers and pins, for example, just pop them all in the same, compressed folder and upload it using the 'Upload Artwork' button.

2. Submit your artwork later

If you have placed your order via our website but your designs aren’t quite ready yet, that’s ok. You have up to 2 weeks to submit your artwork to us, which allows you to take advantage of any special offers that we’re running. 

To submit your designs later, save them with 1. your name, 2. design number, 3. chosen product and 4. your order number. Then email them to info@zapcreatives.com. 

Save all Paint Tool SAI files in .Psd format. Here’s how…

3. Placing a re-order

If you have placed an order in the past and would like to re-order those designs that’s great! We store your artwork for a maximum of 6 months, which saves you the hassle of having to resubmit your designs via email.

To place a re-order, simply place your order online, email us with your previous order number(s) and let us know that you are placing a re-order. 

You may only want to order 1 or 2 designs from your previous order(s). To do this simply quote your old file name(s) and let us know how you would like them to be produced and in what quantities. 

Here’s how to do it… 


Hi Zap!,

I’ve just placed an order #12345 on your website and would like to re-order the following designs from a previous order #12121. Please can I have…

10x [YOURNAME]-DESIGN1-CLEARCHARM-12121
20x [YOURNAME]-DESIGN2-WALNUTKEYRING-12121
10x [YOURNAME]-DESIGN3-ACRYLICPIN-12121

Thanks!

[YOUR NAME] 


If you have any questions about this tutorial or any other aspects of our website and manufacturing processes, please do not hesitate to get in touch. We’d love to hear from you.

More posts